SILENCER RUBBER / RUST PROOF / ADJUST WRENCH / CLICK TOOL

SILENCER RUBBER

Fits Springs with Flat Bottom End
Avoid Metal-to-Metal Contact, to Prevent Noise & Protect Surface!

Part # MSRP excl Tax
SPR02-R9881 JPY 900
  • *1 set (2 pcs)
  • *Can NOT be used on springs with no flat end
  • Compatible Spring Diameter : ID 65 to 80 mm
  • Japanese Utility Model Registration No. 3218278
  • Adhesives applied inside the rubber prevent slipping off.

To eliminate/reduce noise caused from coil to coil impact.

Size O.D.(φ) (mm) Part # MSRP excl Tax
S 60～90 SPR02-H2186 JPY 600
M 90～130 SPR02-G1497 JPY 600
L 130～ SPR02-H2187 JPY 800
  • *1 set (2 pcs)
  • Prevents noises, which usually generated when springs adhere to each other.
  • Compatible with various springs, with the use of the highly elastic material.
  • Adhesives applied inside the rubber prevent slipping off.

RUST PROOF

Part # MSRP excl Tax Note
SST01-F1940-1 JPY 1,500 1 Can
SST01-F1940-6 JPY 9,000 Set of 6 Cans
  • Strong Rust Proofing; Reduces Rust Caused by Snow-Melting Agent.
  • Just spray on threading part to create thin layer of film for protection against corrosion.
  • It is highly effective against rust, caused not only by day-to-day use but also by snow-melting agent.

ADJUST WRENCH

Remarks Part # MSRP excl Tax
2pcs/set SST01-K0335-B JPY 3,500
  1. Chromium-Vanadium Alloy Steel for High-Intensity
  2. Polished Finish for Artistic Appearance (Mirror Finish)
  3. Round Shape to Fit Comfortably in Hand
  4. Increased Overlap Area for Better Workability
  5. 12.7mm (1/2 in.) Hole for Attaching Spinner Handle etc. (Pic.1)
  6. 17mm Hex Hole for Pre-Tightening of Top Nut (Pic.2)
  7. Projection for Anchoring Full-Length Adjustment Bracket(Pic.3)

【Compatibility】

  • Corresponds to spring seats with outer diameter 70 to 150mm
  • Only 6mm thick, to hold well on most types of spring seats (General purpose wrench: 8 to 9mm thick)
  • Application chart (for both TEIN and other products) printed on the back of package

CLICK TOOL

Part # MSRP excl Tax
SAP44-96133-B JPY 400

Damping Force Adjustment Tool

Click Assy Replacement Kit (High Load Type)

Part # MSRP excl Tax Contents
SPS12-S6351 JPY 1,200 Click Assy (new shape) x 1,
Hex Screw x 1
For FS2’s reservoir &
4×4 Damper Gravel 2

Set of replacement click assy (adjustment part) and hex screw for high-load dampers.

Click Assy Replacement Kit (set of 4)

Part # MSRP excl Tax Contents
SPS12-S6144 JPY 5,000 Click Assy (new shape) x 4,
Hex Screw x 4,
8mm Spanner x1

CLICK KNOB KIT

Part # MSRP excl Tax Note
SPS12-S4857 JPY 1,800 Click Knob x1,
Set Screw x1, O-ring
For hex-shape click only. NOT compatible with round click.
Part # MSRP excl Tax Note
SPS12-C9649 JPY 1,100 Round-Shape Knob,
Set Screw, O-ring
Part # MSRP excl Tax Note
SPS12-E0388 JPY 1,600 Hex-Shape Knob,
Set Screw, O-ring
*Across width of Hex Click Knob is 21mm.

PILLOW BALL

Part # MSRP excl Tax
MBWTD18-207 JPY 4,500